Process Measurement, Instrumentation and Process Control: Principles and Best Practices
In an industrial situation where it is required to measure and control some aspects of a process, it is often the application of the knowledge and the ingenuity of the Engineer or Technician which is relied upon to solve the measurement and control problem.
Oil, Gas & Petroleum · 5 Days · Public · Al-Khobraa certified · From USD 2,500
Learning Objectives
- To give an understanding of the principles of operation of a range of sensors and transducers
- By using a hands-on approach, enable the delegate to investigate the operation of an instrumentation system through designing, building and testing a typical sensor combined with appropriate signal conditioning circuits
- To allow the delegate to become familiar and confident with a range of measurement techniques
- To understand the concepts of Process Control and acquire the knowledge relating to the characteristics and properties of a process variable being measured
- To become familiar and knowledgeable with PID control and develop the ability to ‘tune’ a process control system using PID control
- To have the confidence and knowledge to apply the above techniques and principles to solve an unfamiliar and bespoke measurement situation in the workplace
Who Should Attend
This training course will be of benefit to the roles listed below.
- Electronic Engineers and Technicians
- Chemical Engineers and Technicians
- Electrical Engineers and Technicians
- Electronic Design Engineers
- Instrumentation Technicians
- Electricians
- Installation and Maintenance Technicians
- Instrument and Process Control Technicians
- Maintenance Engineers
- Mechanical Engineers and Technicians
Course Outline
Day 1 — Introduction to Sensors, Transducers and Instrumentation Systems
- Course Schedule and Layout
- Introduction to Sensors, Transducers and Instrumentation Systems
- Examples
- Terms and Definitions Associated with Instrumentation Systems, including
Day 2 — Strain, Pressure, and Flow Measurement (also begin practical activities)
- Principle of Strain Measurement – tension, compression, stress, strain, Youngs modulus
- Principle of Operation, Typical Uses and Installation Considerations
- Gauge Types – Principle of Operation and Configurations
- Examples
Day 3 — Temperature, Level and Non-Invasive Ultrasonic Measurement Techniques
- Temperature Scales
- Devices: Principle of Operation - Typical Uses and Installation Considerations of
- Resistance Temperature Detectors (RTD’s) Thermistors
- Thermocouples
Day 4 — Introduction to Process Control Engineering
- Control Strategies
- Block Diagram Representation
- Control Components
- Servomechanisms and Regulators
Day 5 — Tuning PID Controllers
- Empirical Methods of Setting Controllers
- Open Loop Reaction Curve Method (Ziegler-Nichols)
- Default and Typical Settings
- Closed Loop Continuous Cycling Method (Ziegler-Nichols)
Accreditation
Al-Khobraa certified. On completion delegates receive an Al-Khobraa certificate of achievement.
Dates & Venues
| Dates | Venue | Delivery | Duration | Fee (USD) |
|---|---|---|---|---|
| December 14–18, 2026 | Virtual | Virtual | 5 days | 2,500 |
Inquire about Process Measurement, Instrumentation and Process Control: Principles and Best Practices · Inquire on WhatsApp
Frequently Asked Questions
What do Al-Khobraa oil, gas and petroleum courses cover?
The portfolio spans the full value chain: upstream exploration, drilling and well control; midstream processing, pipelines and gas treatment; and downstream refining and petrochemicals — plus process safety management (PSM), HAZOP studies, corrosion control and plant operations. Trainers are practitioners from the sector.
Who should attend an oil, gas and petroleum course?
These courses suit process, production and petroleum engineers, plant and field operators and supervisors, maintenance and inspection staff, HSE and process safety professionals, and technical or commercial staff joining the sector from another industry.
How long are oil, gas and petroleum courses, and where are they held?
Most Al-Khobraa oil, gas and petroleum courses run over 5 days. The exact duration, dates and city for this course are listed in the dates section on this page. Public sessions run across Saudi Arabia — Riyadh, Jeddah, Al-Khobar, Jubail and Yanbu — as well as regional and international venues, with live virtual classrooms available on request.
What certificate will I receive?
Delegates who complete the course receive an Al-Khobraa certificate of completion, issued by a Saudi-registered training provider. Al-Khobraa also delivers internationally accredited programs; where a course carries an external awarding body such as PMI, CIPS, ILM or IOSH, that body is named on the course's own page.
Can oil, gas and petroleum training be delivered in-house for our team?
Yes. Any Al-Khobraa oil, gas and petroleum course can be delivered in-house at your own premises anywhere in Saudi Arabia or the GCC, with the content, dates and language of delivery tailored to your team. Al-Khobraa is an approved HRDF (Hadaf) provider, so eligible Saudi employers can seek training support. Contact us for a quotation.
Related Oil, Gas & Petroleum Courses
- Advanced Directional Drilling and Fishing Operations
- Advanced Production Operations
- Advanced Seismic Interpretation
- Advanced Well Integrity Management
- Ammonia Refrigeration System Specific To Ammonia Plant
- Applied Digitalization for Oil & Gas
- Applied Reservoir Engineering and Management: Analysis, Characterization, Simulation, Integration, Statistics and Naturally Fractured
- Carbon Dioxide Surface Facilities