ETAP: Electrical Power System Analysis Software

Power systems equipment must withstand not only the rated voltage, which corresponds to the highest voltage of a particular system, but also expected short level. Accordingly, it is necessary to set protective relays based on these results obtained from short circuit study. One of hot issues now related to these is arc flashing study which is mainly based on the studies of short circuit and relay co-ordination as well. All these three issues should be dealt as integral parts & bulk.

Electrical & Power Engineering · 5 Days · Public · Al-Khobraa certified · From USD 3,900

Learning Objectives

  • Understand the importance of power system modeling
  • Understand the need for calculation of the short circuit current.
  • Consequences of sustained fault current & type of faults.
  • Manual calculation of short circuit using simple methods like MVA method, P.U. the system, etc…
  • Balanced & unbalanced power flow analysis.
  • Voltage drop
  • Analyze the motor starting/acceleration.
  • Switchgear rating (breaking & making capacities).
  • Power problem problems & assessment.
  • Importance of arc flashing and relay coordination studies from operation & safety point of view.
  • Test cases simulation using computer software.

Who Should Attend

This course is intended for anyone who must perform calculations, provide settings or approve the work performed by others. The trainee should be a graduate engineer or have the equivalent practical work experience in electrical power systems. i.e.

  • Consulting Engineers
  • Electrical Engineers
  • Project Engineers
  • Maintenance Engineers
  • Commissioning & testing Engineers

Course Outline

Day 1 — Introduction - Reasons for Faults - and Classification…

  • The distinction between Load and Fault Current.
  • Sources of Short-Circuit Current.
  • Rotating Machine Reactance Changes (Subtrasient, Transient & steady-state).
  • Electrical systems modeling and fundamentals.

Day 2 — Optimal power flow

  • Optimum capacitor locations
  • Introduction to Fault current Calculations.
  • Breaking & making currents.
  • Per unit systems.

Day 3 — Calculation of Isc by symmetrical components

  • Calculations as defined & recommended by IEC 60909/ANSI C37 standards.
  • Different test simulation cases using ETAP power station/CYME PSAF/SKM power technologies.
  • Short Circuit Studies (Fault-Levels – Switchgear/Fuse Rating). Typical cases for switchgear sizing.
  • Relay co-ordination & Arc Flashing studies.

Day 4 — Data Collection

  • Plotting Time/Current Curves
  • LV Circuit Breakers, different types
  • Fuses
  • Time Delay/Instantaneous Relays

Day 5 — System earthing (Solid, resistance & reactance or even…

  • Motor Acceleration Analysis
  • Power Harmonics problems, related issues & assessment.
  • Substation grounding grid design
  • DC System Load Flow & Short-Circuit

Accreditation

Al-Khobraa certified. On completion delegates receive an Al-Khobraa certificate of achievement.

Dates & Venues

DatesVenueDeliveryDurationFee (USD)
December 20–24, 2026Dubai, UAEPublic5 days3,900

Inquire about ETAP: Electrical Power System Analysis Software · Inquire on WhatsApp

Frequently Asked Questions

What do Al-Khobraa electrical and power engineering courses cover?

The portfolio covers power generation, transmission and distribution, low- and high-voltage systems, power system protection and relay coordination, switchgear and transformers, motors and drives, SCADA and smart grids, and electrical safety and arc-flash control.

Who should attend an electrical or power engineering course?

These courses suit electrical engineers and technicians, substation and grid operators, protection and control specialists, maintenance supervisors, plant and facilities engineers, and utility or contractor staff working on generation, transmission or distribution assets.

How long are electrical and power engineering courses, and where are they held?

Most Al-Khobraa electrical and power engineering courses run over 5 days. The exact duration, dates and city for this course are listed in the dates section on this page. Public sessions run across Saudi Arabia — Riyadh, Jeddah, Al-Khobar, Jubail and Yanbu — as well as regional and international venues, with live virtual classrooms available on request.

What certificate will I receive?

Delegates who complete the course receive an Al-Khobraa certificate of completion, issued by a Saudi-registered training provider. Al-Khobraa also delivers internationally accredited programs; where a course carries an external awarding body such as PMI, CIPS, ILM or IOSH, that body is named on the course's own page.

Can electrical and power engineering training be delivered in-house for our team?

Yes. Any Al-Khobraa electrical and power engineering course can be delivered in-house at your own premises anywhere in Saudi Arabia or the GCC, with the content, dates and language of delivery tailored to your team. Al-Khobraa is an approved HRDF (Hadaf) provider, so eligible Saudi employers can seek training support. Contact us for a quotation.

Related Electrical & Power Engineering Courses

Browse all Electrical & Power Engineering training courses