المحركات الكهربائية والمشغّلات: استكشاف الأعطال والصيانة والحماية

يعرّف البرنامج المشاركين بأنواع المحرّكات والمشغّلات المختلفة والمصطلحات المرتبطة بها. وستُناقَش تطبيقات الأنواع المختلفة من المحرّكات ومدى ملاءمتها لواجبات تشغيلية مختلفة. وسيُتناول التشغيل واستكشاف الأعطال والصيانة بتعمّق.

الكهرباء والطاقة · 5 Days · Public · Al-Khobraa certified · From USD 3,900

الأهداف التدريبية

  • Have an understanding of the different types of motors and drives.
  • Be able to operate motors as close as possible to the design efficiency.
  • Will be able to monitor efficiency, availability, and reliability.
  • Have learned about selection, operation, and maintenance strategies.
  • Be able to troubleshoot motor and drive problems.
  • To present the operation and construction of AC electric motors and the electrical drives based on modern state-of-the-art inverter technology, and their characteristics that need to be matched with those of loads.
  • To discuss maintenance procedures both for motors and drives following well-established industrial procedures as outlined in standards.
  • To familiarize with troubleshooting methods for both motors and drives following methodologies that have been developed by manufacturers in order to reduce downturn time dramatically.
  • To become familiar with how to utilize single-line drawings and other documentation to successfully perform commissioning, maintenance and troubleshooting.
  • To analyze case studies and learn from such experience.
  • Specify, select and install motors
  • Specify protection requirements for motors
  • Specify speed control requirements for motors
  • Install and commission motors
  • Fix faults on motors
  • Interpret motor performance curves
  • Interface control circuits of motors with PLCs/DCSs
  • Reduce downtime on electrical motors
  • Improve plant safety
  • Improve plant throughput
  • Reduce spares usage and requirements

الفئة المستهدفة

تناسب هذه الدورة الفئات التالية: مهندسو المصانع، فنيو الأجهزة الدقيقة، العاملون في العمليات، فنيو الصيانة الكهربائية والمشرفون، مهندسو الأجهزة الدقيقة والتحكم، وغيرهم من المتخصصين في هذا المجال.

  • مهندسو المصانع
  • فنيو الأجهزة الدقيقة
  • العاملون في العمليات
  • فنيو الصيانة الكهربائية والمشرفون
  • مهندسو الأجهزة الدقيقة والتحكم
  • مهندسو التحكم في العمليات
  • المهندسون الكهربائيون والميكانيكيون
  • المشرفون
  • قادة الفرق
  • المهندسون الميكانيكيون

محاور الدورة

Day 1 — Introduction

  • An Introduction to Motor Types
  • Induction, DC, servo, synchronous, linear, etc.
  • Induction Motors
  • Introduction to AC induction motors and their construction, rotor slip and principles of operation, equivalent circuit, torque-speed characteristics, motoring and regenerative region of operation

Day 2 — Motor Diagnostics & Troubleshooting

  • Identification of damage mechanisms & remediation
  • Damage Mechanisms
  • Dynamic defects - imbalance, misalignment, looseness
  • Insulation degradation

Day 3 — Variable Speed Drives

  • Basic principles of AC Variable-Speed Drives (VSD's), constant torque region, constant power (extended speed) region, four-quadrant operation
  • Power semiconductors, diode, thyristor (SCR), IGBT, MOSFET, GTO, and others
  • Inverters, Voltage-source and Current-source, Pulse Width Modulated (PWM) inverters
  • Two-level pulse width modulated inverter, DC link energy and capacitor sizing, regeneration or dynamic slowdown, dynamic breaking, reg generation

Day 4 — Troubleshooting and Maintenance of Motors

  • Characteristics of motors, enclosures, and cooling methods, application data, design characteristics, insulation of AC motors.
  • Failures in three-phase stator windings, predictive maintenance, motor troubleshooting, diagnostic testing for motors.
  • Troubleshooting and maintenance of AC motors, routine care, dirt and corrosion, lubrication, heat, noise and vibration, insulation.
  • Slow acceleration or refusal to starting of an AC motor, overheating and noise making of the motor, running of bearings at high temperature, or making noise.

Day 5 — Protection of Motors and Drives

  • Protection of AC motors, requirements, overload protection, currents during starting and stalled point, operation of motors under three-phase unbalanced power supply, motor de-rating due to unbalanced currents, stator and rotor protection, single-phase over-current relays, phase unbalance relays, faults in stator and rotor windings, earth faults, phase-to-phase faults, modern relay design and applications, protection targeting AC synchronous motors, over-voltage and under-frequency protection.
  • Fuses, circuit breakers, magnetic and thermal, overload, eutectic, bimetal and solid-state, others.
  • Motor protection curves, back-up protection.
  • Protection of inverters and electronic converters driving motors.

الاعتماد

Al-Khobraa certified. يحصل المشاركون عند الإتمام على شهادة إنجاز صادرة من الخبراء للتدريب.

المواعيد وأماكن الانعقاد

التواريخالمكانطريقة التقديمالمدةالرسوم (دولار)
December 28 – January 1, 2027Kigali, RwandaPublic5 أيام4,500

استفسر عن المحركات الكهربائية والمشغّلات: استكشاف الأعطال والصيانة والحماية · استفسر عبر واتساب

الأسئلة الشائعة

ماذا تغطي دورات الكهرباء والطاقة لدى الخبراء؟

تغطي الحقيبة توليد الطاقة ونقلها وتوزيعها، ونظم الجهد المنخفض والعالي، وحماية نظم القوى وتنسيق المرحّلات، ولوحات التوزيع والمحوّلات، والمحركات ووحدات التحكم بالسرعة، ونظم SCADA والشبكات الذكية، والسلامة الكهربائية والتحكم في مخاطر الوميض القوسي.

لمن تُوجَّه دورات الكهرباء والطاقة؟

تناسب هذه الدورات المهندسين والفنيين الكهربائيين، ومشغلي المحطات والشبكات، وأخصائيي الحماية والتحكم، ومشرفي الصيانة، ومهندسي المصانع والمرافق، والعاملين لدى شركات الكهرباء أو المقاولين على أصول التوليد والنقل والتوزيع.

كم تستغرق دورات الكهرباء والطاقة، وأين تُعقد؟

تمتد معظم دورات الكهرباء والطاقة لدى الخبراء على 5 أيام تدريبية. وتجد المدة والمواعيد ومدينة الانعقاد الخاصة بهذه الدورة في قسم المواعيد بهذه الصفحة. وتُعقد المواعيد العامة في الرياض وجدة والخبر والجبيل وينبع، إضافة إلى مدن إقليمية ودولية، مع إتاحة القاعات الافتراضية المباشرة عند الطلب.

ما الشهادة التي أحصل عليها؟

يحصل المشاركون عند إتمام الدورة على شهادة إتمام صادرة من الخبراء للتدريب، وهي جهة تدريب مسجّلة في المملكة العربية السعودية. كما تقدّم الخبراء برامج معتمدة دوليًا، وعندما تحمل الدورة اعتماد جهة مانحة خارجية مثل PMI أو CIPS أو ILM أو IOSH يُذكر اسم الجهة في صفحة الدورة نفسها.

هل يمكن تنفيذ تدريب الكهرباء والطاقة داخل المنشأة لفريقنا؟

نعم. يمكن تنفيذ أي دورة من دورات الكهرباء والطاقة داخل مقر منشأتكم في أي مكان بالمملكة أو دول الخليج، مع تخصيص المحتوى والمواعيد ولغة التقديم بما يناسب فريقكم. والخبراء جهة معتمدة لدى صندوق تنمية الموارد البشرية (هدف)، بما يتيح للمنشآت المؤهلة طلب الدعم التدريبي. تواصلوا معنا للحصول على عرض سعر.

دورات الكهرباء والطاقة ذات الصلة

Browse all الكهرباء والطاقة training courses