نظرة عامة على PLC: الصيانة واستكشاف الأعطال وحل المشكلات
الكهرباء والطاقة · 5 Days · Public · Al-Khobraa certified · From USD 2,500
نظرة عامة
تغطّي هذه الدورة القائمة على التعلّم بالممارسة إعداد عائلة متحكّمات Allen-Bradley PLC-5 المنطقية القابلة للبرمجة واستخدامها وبرمجتها واستكشاف أعطالها وصيانتها. وتتناول تمارين المختبر الأجهزة الحقلية ووحدات الإدخال والإخراج والأسلاك والانصهار وبرمجة المعالِج، وصولًا إلى استكشاف الأعطال المتعمّق للمعدّات وصيانتها.
الأهداف التدريبية
Understand PLC Control Principles and Applications with Field Devices
Connect and Wire Field Devices to PLC Inputs and Outputs
Understand and use basic Ladder Logic Programming
Use and Configure a Delay Timer and Counter in a Controller
Connect a Power Device Using an Interposing Relay
Identify Allen-Bradley PLC-5 Hardware Components and Equipment
Connect a Programming Terminal to the PLC; KT Card, KE Card, and PCMK Card
Use the Programming Terminal to Troubleshoot Failed Field Devices
Determine Address Names for Input and Output Points
Add Comments to Instructions and Rungs for Program Documentation
Use Symbolic Addressing to Speed Development and Troubleshooting
Use Address and Function Searches within the Program
Save Ladder Logic Ladders and Data Files from the PLC to a Floppy Disk
Restore Ladder and Data Files to a Processor from a Programming Terminal
Print Reports and Documentation of the PLC System and Program
Use the Force Function to Troubleshoot and Maintain Equipment Operation
Troubleshoot Failed Input and Output Field Devices, Power Supplies, and Processors
الفئة المستهدفة
This course is designed for professionals working in electrical and power engineering, as well as those whose responsibilities require a stronger practical grasp of the subject and its application within their organisation.
Professionals in Instrumentation & Telecom
Electrical and power engineers
Maintenance and technical specialists
محاور الدورة
Day 1 — Introduction to Control Systems
An introduction to control systems and ladder logic is provided by building relay logic circuits using batteries, relays, switches, lights, and connecting wires. Fundamental PLC principles are established as the participants work together to perform the functions of a PLC wired with input and output devices
The components of an A-B PLC5 programmable logic controller are covered noting their function and use. Participants attach input switches and output lights to a PLC system and write basic ladder logic to control their operations. Normally open contacts (XIC), normally closed contacts (XIO), output coils, timers, and counters are used to build and/or motor starter, and safety monitoring circuits
Day 2 — Using a Programming Terminal to Monitor and Edit
The use of 6200 series software to monitor and edit control systems is the focus as participants practice the use of KE, KT, and PCMK modules to establish communications between their PC and the PLC. After locating the proper address on the Data Highway, participants log on to the appropriate PLC and check data and program file operation
Day 3 — System Troubleshooting Using the Programming Terminal
The programming terminal can shorten the time required to locate and repair failed components. Participants practice using the terminal to locate contacts that are preventing equipment operation, locate the addresses in-field hardware, verify proper voltages and current levels, and isolate and repair failed devices
Day 4 — System Utilities for Maintenance and Repair
Steps required creating backup copies of the ladder logic in a PLC and the steps to restore a program to a PLC in the event of a hardware failure or power upset are covered.
In addition, practice with utilities like printing ladder logic and status reports to a printer is provided. Also included are forcing inputs and outputs, adding symbols and comments to ladder logic, and moving from data files to ladder files while troubleshooting
Day 5 — Pump Control Operations
The use of the PLC as a controller for pumps and other electrical and safety equipment is studied. Typical ladder logic as used on offshore platforms is used to demonstrate control and safety principles. Participants will view the existing code and have the opportunity to build and enhance control systems during the hands-on sections of the course.
الاعتماد
Al-Khobraa certified. يحصل المشاركون عند الإتمام على شهادة إنجاز صادرة من الخبراء للتدريب.
تغطي الحقيبة توليد الطاقة ونقلها وتوزيعها، ونظم الجهد المنخفض والعالي، وحماية نظم القوى وتنسيق المرحّلات، ولوحات التوزيع والمحوّلات، والمحركات ووحدات التحكم بالسرعة، ونظم SCADA والشبكات الذكية، والسلامة الكهربائية والتحكم في مخاطر الوميض القوسي.
لمن تُوجَّه دورات الكهرباء والطاقة؟
تناسب هذه الدورات المهندسين والفنيين الكهربائيين، ومشغلي المحطات والشبكات، وأخصائيي الحماية والتحكم، ومشرفي الصيانة، ومهندسي المصانع والمرافق، والعاملين لدى شركات الكهرباء أو المقاولين على أصول التوليد والنقل والتوزيع.
كم تستغرق دورات الكهرباء والطاقة، وأين تُعقد؟
تمتد معظم دورات الكهرباء والطاقة لدى الخبراء على 5 أيام تدريبية. وتجد المدة والمواعيد ومدينة الانعقاد الخاصة بهذه الدورة في قسم المواعيد بهذه الصفحة. وتُعقد المواعيد العامة في الرياض وجدة والخبر والجبيل وينبع، إضافة إلى مدن إقليمية ودولية، مع إتاحة القاعات الافتراضية المباشرة عند الطلب.
ما الشهادة التي أحصل عليها؟
يحصل المشاركون عند إتمام الدورة على شهادة إتمام صادرة من الخبراء للتدريب، وهي جهة تدريب مسجّلة في المملكة العربية السعودية. كما تقدّم الخبراء برامج معتمدة دوليًا، وعندما تحمل الدورة اعتماد جهة مانحة خارجية مثل PMI أو CIPS أو ILM أو IOSH يُذكر اسم الجهة في صفحة الدورة نفسها.
هل يمكن تنفيذ تدريب الكهرباء والطاقة داخل المنشأة لفريقنا؟
نعم. يمكن تنفيذ أي دورة من دورات الكهرباء والطاقة داخل مقر منشأتكم في أي مكان بالمملكة أو دول الخليج، مع تخصيص المحتوى والمواعيد ولغة التقديم بما يناسب فريقكم. والخبراء جهة معتمدة لدى صندوق تنمية الموارد البشرية (هدف)، بما يتيح للمنشآت المؤهلة طلب الدعم التدريبي. تواصلوا معنا للحصول على عرض سعر.